STOP-IT! Absorbent Fiber is the most efficient nonselective absorbent available. It is a scientifically designed, lightweight fiber derived from recycled cellulose. It is engineered to pick up oils or water or both. It is the only fiber that is truly NON SELECTIVE. Other fibers will pick up oil or water and when staturated with either will reject the other. A STOP-IT! fiber will pick up the both at the same time. No need to use excess absorbent to pick up mixed spills!

STOP-IT! Absorbent Fiber absorbs 20 times its own weight in oils A ten pound bag is sufficient to pick up 25 gallons of oils, fuels, etc. Water and polar compound pick up is 15 times its weight. Dollar for dollar, STOP-IT! Absorbent Fiber is THE most economical absorbent.

STOP-IT! Absorbent Fiber has less than 2% ash and furnishes 7,800 BTU/ lb. fuel value. It is emminenty suitable for pickug up and thickening wastes to be incinerated. Further, STOP-IT! Absorbent Fiber can be easily wrung out for liquid recovery and absorbent reuse. OMNI/ajax has pioneered the use of recycled fibers that can be reused through wringing for use as liquid absorbents.

STOP-IT! Absorbent Fiber is intended for non-aggressive liquids (pH2-pH10) and should NOT be used for oxidizers, strong acids or concentrated alakalies. The SorbaSet series of neutralizing solidifiers is suggested for these types of wastes.

SPECIFICATIONS

Density: 6.6#/ft3 (as packed ) pH 6.8

DataSheet - Click Here.