STOP-IT!™ Absorbent Booms

Got a Leak? STOP-IT!™

Had a spill? STOP-IT!™

THE PERFECT ABSORBENT.

• For all non-aggressive liquids
• Biodegradable & non-toxic
• New controlled fiber length for maximum absorbency
• The ORIGINAL cellulose absorbent
• Wring out for recover and reuse
• Highest pick up per $
• Available loose and in socks & pillows
• New improved sock fabric
• Will not mold or mildew
• Incinerates with low ash and high BTU
• Environmentally Friendly

Packaging:

Particulate: 10 lbs. Plastic bags. Picks up from 10 to 15 gallons. 25# Box: Picks up from 25 to 35 gallons. Can be used to soak up spills or as a sweeping compound. Will actually draw liquid out of concrete! GP10/GP25

Socks (4"x48"): 40 per case Picks up from 25 to 35 gallons. The Industry Standard. Highly lexible fabric allows configuring to almost any surface. GP448

Pillow/Pans (12"x12"x3"): 10 per case. Impermeable poly backing fully contains absorbed liquid when used as a pan. Acts as a barrier when used as a pillow. GP12

MADE FROM 100% RECYCLED FIBERS!

A PRODUCT OF OMNI TECHNOLOGY.

DISPOSAL OF NON-HAZARDOUS LIQUIDS

Indiscriminate disposal of liquids can result not only in large fines, but also in some cases jail sentences. An overall spill and leak control program is indispensable and mandated by law. Of first importance is the identification and classification of liquids in order to separate those that are hazardous from those that are not. Consulting the Material Safety Date Sheet (MSDS) supplied by the manufacturer can best do this. This could show the degree and type of hazard of the product. In many cases, legal disposal methods are also indicated. A large number of formerly hazardous compounds have been reformulate to be non-hazardous and in some case biodegradable.

Of prime importance is to avoid mixing non-hazardous liquids with hazardous types. When this is done ALL the liquid becomes hazardous with concurrent higher disposal cost. So the segregation of hazardous and non-hazardous liquids is essential. Once the identification of a nonhazardous liquid is established, a method of containment and collection is needed. The use of the OMNI STOP-IT!™ Sorbent Booms and particulate for spills & leaks on land is the most efficient means. OMNI SorbaSolv™ in boom, pillow and particulate will collect and retain non-aqueous liquids on water or mixed with water. Both of these products are based on biodegradable recycled cellulose fibers. When the liquid is extracted, by using a wringer or compression device, less than 10% liquid is retained, allowing for reuse in the work place. Saturated socks can be used in conjunction with a waste-to-energy program. ALWAYS CHECK WITH LOCAL AUTHORITIES BEFORE SWERING ANY LIQUIDS! Oils, grease and other suitable organics are best entered into a fuel oil program. See the OMNI SPILL DISPOSAL CHART for more specific information. Oil/water mixtures are best separated by standing and in some cases the addition of a demulsifier. Organics that float can be collected using SorbaSolv™ on the surface or at the bottom , retained by a weight, for heavier organics. Residual oils in water maybe best removed by passing through a bed of SorbaSolv™ particulate as a filter media.

DISPOSE OF ALL WASTES IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS!