Commonly Encountered Wastes That Can Be Collected with Sorbents:

Aceltaldehyde
Acetic Acid 
Acetone 
Acetyl Chloride 
Acrylic Acid 
Allyl Alcohol 
Aminobenzoic Acid 
Ammonia (Anydrous) 
Ammonium Fluoride 
Ammonium Hydroxide 
Amyl Alcohol 
Aniline 
Aviation Fluid 
Benzaldehyde 
Benzene 
Benzoic Acid 
Benzyl Alcohol 
Boric Acid 
Brake Fluid 
Bromine 
Butyl Acetate 
Butyl Alcohol 
Butyl Cellosolve 
Calcium Hydroxide 
Carbolic Acid 
Carbon Disulfide 
Carbon Tetrachloride 
Cellosolve Acetate 
Cellosolve Solvent 
Castor Oil 
Chlorobenzene 
Chloroform 
Chloronapthalene 
Chloroethene 
Chromic Acid (50%) 
Citric Acid 
Corn Oil 
Cottonseed Oil 
Cresol 
Cyclohexane 
Dibutyl Phthalate 
Diesel Fuel 
Diethylamine		 Diethyl Ether 
Dimethyl Formamide 
Dimethyl Sulfoxide 
Dioctyl Phthalate 
Dioxan 
Ether 
Ethyl Acetate 
Ethyl Alcohol 
Ethyl Benzene 
Ethyl Chloride 
Ethyl Ether 
Ethyl Propionate 
Ethyl Dichloride 
Ethylene Glycol 
Formaldehyde 
Freon 
Fuel Oil (Diesel) 
Furfural 
Gasoline 
Gearbox Oil 
Glycerol 
Hexane 
Hydrazine 
Hydrochloric Acid 
Hydroflouric Acid 
Hydroquinone 
Hydrogen Cyanide 
Hydrogen Peroxide 
Isoamyl Acetate 
Isobutyl Alcohol 
Isooctane 
Isopropyl Acetate 
Isopropyl Alcohol 
Kerosene 
Keytones 
Linoleic Acid 
Linseed Oil 
Lubricating Oil 
Methylamine 
Methyl Alcohol 
Methyl Cellusolve 
Methylene Bromide 
Methyl Chloride		 Methyl Ether
Methyl Ethyl Ketone
Methyl Isobutyl Ketone
Methyl Methacrylate
Mineral Oil
Mineral Spirits
Monoethanolamine
Morpholine
Motor Oil
Naptha
Napthalene
Nitric Acid
Nitromethane
Octane
Olive Oil
Paraffin 
Perchloroethylene
Phenol
Phosphoric Acid
Potassium Hydroxide
Propanol
Propionic Acid
Propyl Alcohol
Propylene Glycol
Resorcinol
Silicone Oil
Silver Nitrate
Sodium Bicarbonate
Sodium Chloride
Sodium Hydroxide
Sodium Hypochlorite
Sodium Nitrate
Styrene
Sulfuric Acid
Toluene
Transformer Oil
Trichloroethylene
Triethylene Glycol
Turpentine
Vinegar
Xylene

LIMITATION OF USE:
Care should be taken when using Universal Sorbents to pick up fuming acids (such as Nitric and Sulfuric Acid), as well as Chlorinated Solvents as these chemicals may degrade the polypropylene material.

WASTE DISPOSAL METHOD:
All Sorbents in and of themselves are considered non-hazardous as defined by RCRA (40 CFR 261). Once used, these products will take on the characteristics of the chemical sorbed and needs to be disposed of accordingly. Disposal of these products (used or unused) must be in compliance with all local, state, and federal regulations.

NOTES:
American Standard Testing Method (ASTM) F726-8: Standard Method of Testing Sorbent Performance of absorbents was used. Performance of absorbents was used. All sizes, weights, and other related information are within manufacturer specifications.